News Ecut

“We have two more resources, but not two more employees.” Says the owner of a small contract manufacturing company.
“Another center or another lathe is nothing new. An E.cut™ is getting out of the fray,” says the production manager of a small machining company.
The hourly operating cost of E.cut™ , dozens of times lower than many machining operations, leads to the use of this technology to change, sometimes radically, conventional working methods and taken for granted.
The result is often clamorously cheaper, and often technologically innovative.
The advantages of wire erosion cutting clash with the high cost of that technology. Only special productions in high value-added sectors can adopt it.
E.cut™ breaks down this barrier!
An hourly operating cost of less than 2 euros per hour, and an overall cost under depreciation that never exceeds five/8 euros per hour, combined with the simplicity of E.cut™ technology, open up new horizons.
Whoever is following this path, is out of the fray !

In small mechanical companies the modest purchase cost of an E.cut™ gives the possibility to have the technology of wire cutting at home, even without a high workload.
It is enough to have to turn to third parties for wire cutting. No more uncontrollable waiting times, and uncertain costs.
Where very hard and expensive materials are processed (aeronautical, gas&oil, racing,...), operating with very expensive and often delicate machining centers, the adoption of E.cut™ leads to the removal of as much material as possible, almost reaching the final height. No shavings, but often valuable scrap. Reduction in the cost of tools for the removal, and less wear and tear on the cutting machines.
In the sector of gears, pulleys, and rotating bodies, especially those of large dimensions, the possibility of obtaining keyways, even opposed and/or multiple keyways, up to internal gears, of high precision in a simple and safe way leads to a reduction of costs unthinkable with traditional systems.
The clean, precise, burr-free and material-free cutting of even complex profiles represents a revolution in the cutting of pipes or thin sheets. It is the cost of the E.cut™ system that makes wire cutting possible, convenient, and often unique.

One of the first manufacturers of these machines and a world leader in the sector, Baoma has been operating for over 25 years.
As the holder of dozens of patents, it is at the forefront in the search for reliable solutions.
For over 11 years Genesi has been distributing Baoma’s machines in Italy and Europe under the E.cut™ brand. Some European patents have been filed.
Materials, mechanical, electronic and software components of E.cut™ machines are specific for the European market.
The Genesi service center, deals ONLY with these machines. Spare parts for machines that have not been produced for years are available.
The large number of customers with more E.cut™ machines is the best proof of their reliability.

E.cut ™ is only Genesi.  Not E.cut ™ ? Not the same !

EMO 2019 Hannover
Also in this edition E.cut™ was present together with Baoma.
In addition to numerous patents, 3 Euro patents make E.cut™ a machine different from the original.
Different, to meet the needs of the European mechanical industry.
Different in the components installed, all strictly available in Europe, and of primary world brands.
Different in the realization of the mechanical part, with materials and parts of the highest quality.
Different in the electrical and electronic part, entirely made in the same production area.
Different in Europe for the mode ‘of assistance’ before and after sales that ensure the functionality’ over time.
Service interventions in a very short time on site, and a connection through tele assistance immediate and constant.

The largest mechanical company in the world, having verified the characteristics and capabilities of E.cut™, installed the first machine for one of its Italian plants in 2014, followed a few months later by a second one.
Having established the reliability of the plants and the readiness of the Genesi after-sales service, after a few years other machines were purchased to be included in very important production lines.
The latest Ecut™ has been included in a futuristic Additive Manufacturing department, a sector in which E.cut™ is the Italian leader.

RELIABILITY
In the country of origin of these machines, after two or three years of work are returned to the manufacturer who at little expense, resets them (!). Or they are thrown away!
Obviously this is not the custom in Europe.
The costs would be too high, so a machine must guarantee its functionality over time.
The following images concern one of the first machines sold in Italy. A few simple failures, which occurred as soon as purchased and ‘was promptly fixed, but after almost 12 years, disappeared the manufacturer, and no longer’ available important electronic parts, it seemed time to throw it away.
The deep knowledge acquired by Genesi in these years, has allowed to adapt new components to the old electronics, and, with a minimum expense to have the machine running perfectly.

The reliability, but much more important, the precision and accuracy of the workings have brought the spread in Italy to well over 100 machines installed.
In many cases the first machine was followed by others. From the small to the big company, the cheapness of working with E.cut has allowed considerable savings. Very often work cycles have been substantially revolutionized. In the following images, one of the most important Italian gear manufacturers has acquired two plants a few months later.
Purchased to cut keyways on large gears, once the precision and ease with which this precision is obtained had been measured, it was quickly passed to much more demanding and delicate internal gears.

E.cut™ is only Genesi.  Not E.cut™ ?  Not the same !