Tall, very tall, almost prohibitive
This is the profile that must be obtained in a sliding bronze sleeve.
It’s a bit of a special sleeve.
It is 500 mm high, and the hole is 250 mm.
The 0.18 mm molybdenum steel wire generates a cut of 0.20 mm. Tolerance is + – 2 cents, the profile was made with a CAD, and imported directly from DXF. Compensation has been added via the CNC.
The roughness is more than satisfactory, a blow of cloth, and so on.
Maybe you could do it with a stapler, but what a stapler! And what a cost!
500 mm high, the maximum for this E.cut 63, but parts up to 800 mm thick can be cut.
P.S. The proceeds from the processing of 6 of these pieces has paid the entire machine
